 |
|
Stair treads - type O5-M |
||||||||||
 Back |
Typical construction
(other sizes available)
(other sizes available)
• Based on type O5 ounched pattern
• Designed to loads of BS6399 Part 1:1996
• Slip resisting surface
• Maximum 5 mm diameter holes for pedestrian access in stiletto
• Designed to loads of BS6399 Part 1:1996
• Slip resisting surface
• Maximum 5 mm diameter holes for pedestrian access in stiletto
heels
• Can be supplied to satisfy Document "M"
• With or without rear riser
• Optional powder coated visual nose
• Standard range to 1500 mm span
• Bespoke designs as required
• Alternative designs using close mesh rib gratings and O5 visual
• Can be supplied to satisfy Document "M"
• With or without rear riser
• Optional powder coated visual nose
• Standard range to 1500 mm span
• Bespoke designs as required
• Alternative designs using close mesh rib gratings and O5 visual
nosing
Stair treads type O5-M is based on the type O5 pattern.
Type O5 is identified by 5 mm dia. punched holes and low visual transparency. This pattern is used commonly in high working areas to stop faling objects or in public areas requiring heel-proof flooring.
• Thickness: 2 mm thick material
• Material: Steel
• Surface treatment: Self coloured or Hot dip galvanised
• Material: Steel
• Surface treatment: Self coloured or Hot dip galvanised
For further information, please contact our sales department.
Typical construction and use of type O5-M treads in conjunction with landings and walkways.
